Gas compressor removed

As the Waitsia Stage 1 Expansion gets under way in earnest, the gas compressor that was installed at the Xyris Production Facility when it was first built in 2004 was recently removed. This is part of MEPAU’s commitment to remove redundant equipment and keep sites tidy. It’s also part of preparing for the expansion.

Cameron Goodchild (MEPAU Person in Charge) says the compressor only took two days to remove and the job went exceptionally well, with zero incidents or injury. A detailed engineering lift study had been prepared in the pre-planning stage due to the weight and complexity of the compressor.

Even so, a very thick layer of grout under the compressor made the task more challenging than anticipated. The grout, which was in place to prevent water seeping out of the concrete slab into the steelwork, had to be manually removed with sledgehammers and jackhammers.

The compressor itself weighed 55 tonnes, and was taken by truck to a scrap dealer in Geraldton, to be recycled into other products. There was also a cooling pack, similar to a radiator, which weighed 13 tonnes.

Cameron Goodchild says MEPAU engaged local labour to assist with the removal of the compressor. “We had about a dozen people help with the job, all local,” he says. “Lenane Holdings provided the trucking transport. Geraldton cranes supplied the lifts. And Westweld Engineering undertook the deconstruction of the compressor.”

Cooling pack on truck
Compressor loaded onto truck

New pipes have arrived from China

The shipment of pipes which will be used to construct the new Waitsia pipeline arrived recently. Two hundred and twenty 18 m lengths will be used to build the 4km pipeline joining the Xyris Production Facility to the Dampier to Bunbury Natural Gas Pipeline.

New pipe for Waitsia stage 1 expansion, Dongara Western Australia

Foundation works starting in early February

A Dongara company, In-situ Construction & Maintenance, will be mobilising equipment to the Xyris Production Facility site in early February.

Foundation works are expected to commence the first week of February and we plan on pouring concrete shortly after. This work is in preparation for the new equipment due to arrive soon for the Stage 1 expansion.

As usual, on the day we posted this news to the website we sent an email to everyone who has asked to be kept updated. If you didn’t receive an email and would like to in future, please add your details here.

Get our Updates

Search

The Northern Perth Basin

The Northern Perth Basin is a prolific oil and gas producing area covering a large portion of the Mid West region of Western Australia. The town of Dongara, located approximately 360km north of Perth, is the regional economic hub for a number of industries, including oil and gas.